Product ID:DTL87G HIGH GLOSS THINNER
MSDS Date:12/21/1994
FSC:8010
NIIN:00F005983
MSDS Number: BWHJG

PPG INDUSTRIES

4325 ROSANNA DR
ALLISON PARK, PA 15101-5000
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555/216-572-6111

Cage: PPGIN

PPG INDUSTRIES

ALLISON PARK, PA 15101-5000 US

Telephone: 412-492-5555/304-843-1300

Cage: PPGIN

XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 25-30%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE

CAS: 64742-89-8

Fraction By Weight: 15-20%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 2-5%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: 5-10%

DIMETHYL GLUTARATE *94-4*

CAS: 1119-40-0

Fraction By Weight: 1-2%

ACETONE; DIMETHYL KETONE; 2-PROPANONE

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 35-40%

OSHA PEL 750 PPM

ACGIH TLV: 750 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTIION: HARMFUL/FATAL. EYES:
SEVERE IRRITATION. SKIN: MODERATE IRRITATION, MAY BE ABSORBED.
INHALATION: HARMFUL, IRRITATION OF EYES/NOSE/THROAT/RESPIRATORY
SYSTEM, PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. INTENTIONAL
MISUSE BY DELIBERATELY CONCENTRATING & INHALING CONTENTS CAN BE
HARMFUL/FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, WATERING, HEADACHES, NAUSEA,
DIZZINESS, LOSS OF COORDINATION, REDNESS, ITCHING, BURNING
SENSATION, VISUAL DISTURBANCES, DRYNESS, CRACKING, SWELLING.

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: IMMEDIATELY FLUSH
W/PLENTY OF WATER FOR 15 MINS. SKIN: IMMEDIATELY FLUSH W/PLENTY OF
WATER FOLLOWED BY WASHING W/SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. APPLY ARTIFICIAL RESPIRATION & OTHER SUPPORTIVE
MEASURES AS REQUIRED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:11F
Lower Limits:1.7
Extinguishing Media:CO2, DRY CHEMICAL, UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY
MAY BE USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG
NOZZLES ARE PREFERRABLE. WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. EVACUATE AREA &
REMOVE ALL IGNITION SOURCES. TAKE UP MATERIAL
W/SAND/VERMICULITE/OTHER NONCOMBUSTIBLE ABSORBENT MATERIAL & PLACE
IN CLEAN, EMPTY CONTAINERS FOR DISPOSAL. ( SEE SUPP)

Handling and Storage Precautions:DON'T STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS 1B FLAMMABLE LIQUIDS.
Other Precautions:IF MATERIAL IS PART OF A MULTIPLE COMPONENT SYSTEM,
READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING
MIXTURE MAY HAVE HAZARDS OF ALL OF ITS PARTS. CONTAINERS SHOULD BE
GROUNDED WHEN POURI NG. (SEE SUPP)

Respiratory Protection:WEAR NIOSH/MSHA APPROVED AIR PURIFYING/AIR
SUPPLIED RESPIRATOR TO PREVENT OVEREXPOSURE TO VAPORS.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST IN VOLUME/PATTERN TO KEEP
CONCENTRATION OF CONTAMINANTS Protective Gloves:NITRILE/NEOPRENE RUBBER.
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:PROTECTIVE CLOTHING, IMPERMEABLE APRON.
Work Hygienic Practices:DISCARD CONTAMINATED CLOTHING.
Supplemental Safety and Health
SPILL PROCEDURES CONT'D: ONLY SPILLED MATERIAL & ABSORBANT SHOULD BE
PLACED IN THIS CONTAINER. OTHER PRECAUTIONS CONT'D: AVOID FREE FALL
OF LIQUIDS IN EXCESS OF A FEW INCHES.

Boiling Pt:B.P. Text:132.8-437F
Vapor Pres:128.2
Vapor Density:>1
Spec Gravity:0.8
Evaporation Rate & Reference:(BU O AC = 100): 665
Solubility in Water:46.1%
Appearance and Odor:NON-VISCOUS LIQUID W/CHARACTERISTIC SOLVENT ODOR.
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES/MINERAL ACIDS/OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT, ELECTRICAL EQUIPMENT,
SPARKS, OPEN FLAMES, HOT SURFACES, OTHER IGNITION SOURCES.
Hazardous Decomposition Products:CO & TOXIC GASES.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.